Serpent Viper 990 1/8 Nitro On-Road Car Kit

The Serpent Viper 990 1/8 Nitro On-Road Kit has been based on the ever popular Serpent 989 chassis kit. Serpent has made many revisions to the chassis to improve flex characteristics and improved weight distribution. Get the Serpent Viper 990 On-Road chassis and experience true on-road precision.

The ultra narrow chassis has been milled down to allow a lower radio plate as well as improved flex points. The central weight bridge is mounted from underneath and allows for quick weight distribution changes. The weights are attached using nylock nuts for a bulletproof finish. The engine mounts have been lowered by 1mm for better center of gravity. The radio-box has been completely redesigned to to be very compact while still allowing space for older type receivers and transponders. These features and more come together giving you a chassis that can be tuned for any track.

NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.

• Ultra-narrow chassis
• Central weight bridge is mounted from underneath for quick changes
• Engine has been lowered by 1mm for improved CG
• Updated rear-end allows for re-active toe as well as avoiding any binding
• Pivot ball height has 3 adjustments for fine tuning
• Aluminum front inserts use an eccentric to change the roll-center
• Front and rear roll bar is bearing supported for smooth operation
• The Narrow rear axles uses steel CVDs for a durable drivetrain

• (1) Serpent Viper 990 1/8 Nitro On-Road Kit

Needed to Complete:  

• Radio system (transmitter and receiver)
• Personal transponder
• Steering & throttle servos
• Engine
• Manifold & exhaust
• Starter box & starter box battery pack
• Receiver battery pack
• Glow-plug igniter
• Battery charger
• 1/8-scale bodyshell & Lexan paint,
• wheels & tires
• Model R/C car fuel (nitromethane)
• Tape
• Air filter & oil
• CA glue
• Bearing oil
• Medium-grade (blue) thread-lock
• Tools